Home » Sewing » Swatches Galore!

Swatches Galore!

Several months ago my husband was chatting with me about different options to improve some mods for his car. The mod we decided on would need some reflective fabric, so I went out to see what our options would be. I stumbled on Seattle Fabrics and saw several options for reflective fabric and trim. The only question was which would be appropriate. To find out I ordered some swatches and decided that I would order swatches for several of the knits they offered.

I mentioned in my last post that I would likely not be able to sew much for the next several weeks. The reason for me not being able to sew is that I finally went in for the surgery that will (hopefully) fix my hip. I am on crutches for the next month and physical therapy could last up to a year. It means I’ll be able to wear heels again, run around, hula hoop dance, and so much that I haven’t been able to do for the three years. I thought I would share these swatches since I can not do much sewing right now. So if you come here to see my finished garments feel free to skip this post!

The first swatches are the reflective fabric and tape/ribbon:

Seattle Fabrics Sample-1559The reflective tape is on top on the left it has a slick top with a woven back. It is fairly stiff and would not lend itself to most garment applications. below the tape is the iron on reflective tape. The top layer peels off and I have not tested the iron on effectiveness of it. The reflective ribbon feels as flexible as any other ribbon and would sew on very well. The reflective portion is a bit off set, but most folks would not notice. The bottom tape looks and feels exactly like the Army’s Reflective PT belts! I can’t imagine what I would ever use it for.

On the right we have the reflective piping. It is quite flexible and would be great to use in seams of any athletic gear. You can barely see it in the photo above, but the orange peeking out behind the piping is a piping tape. It would be good for the same applications as the piping, but it would be a bit more subtle and perhaps easier to sew in. Finally we come to the reflective fabrics. The top two are silver and the bottom is orange. They are lightweight from the top to heavyweight on the bottom. You could easily use the topmost fabric in some outerwear to increase visibility.

Seattle Fabrics Sample-1560

Packaging back

Now onto the more interesting fabric! Knits and fleeces!

Seattle Fabrics Sample-1553

From top to bottom these swatches are for their Wicking Jersey, Dryline, Active Dry, and their Anti-Microbial poly/lycra knits. The Wicking Jersey are soft to the touch and have some four way stretch. Most of the stretch is with the width and a very tiny amount down the length. The Dryline knits are four-way stretch, feel smooth to the touch, and are thinner than the Wicking Jersey. The Active Dry are smooth on one side and textured on the other. They have stretch with the width of the fabric and almost none with the length. The Anti-Microbial knit only comes in grey. It is a thin knit, smooth and extremely stretchy in all directions!

Seattle Fabrics Sample-1554

Look at all the colors!

Next up is the Polartec Power Shield. It is smooth on one side and fleece backed. It has very limited stretch with the width and none with the length of the fabric. It would be great for sweatshirts, hoodies, jackets, and pants if they don’t have a ton of negative ease. The colors are vibrant and selection is great! If it had more stretch I might consider making some into leggings, but I think it would be great for an Avocado hoodie!

Seattle Fabrics Sample-1549

Seattle Fabrics Sample-1550

Look at the difference from the front to the back!

Below is the description that Seattle Fabrics gives for it.

Seattle Fabrics Sample-1551

Fleece! Below we have what they call PT Wind Pro. it comes in two different weights and in a lot of colors! It is a fairly think fleece, so think sweatshirts and jackets. Two of the heavier weight fleece have a short fur pile backing which makes it very soft to the touch. If I bought myself some and made it into a sweatshirt I don’t know that I would be able to take it off!

Seattle Fabrics Sample-1547

Oooh! Soft!

Seattle Fabrics Sample-1543

This can give you an idea of how thick they are. I imagine they would be quite warm.

Seattle Fabrics Sample-1541

And the package back.

The last set of swatches I invested in was Ultrex. Ultrex is a water repellant fabric, which would make it ideal for outerwear. This makes me want to by the Minoru Jacket by Sewaholic to get some of this fabric.

Seattle Fabrics Sample-1556

There is a wide selection of colors!

Seattle Fabrics Sample-1558

Colors and description on the back.

Hopefully I will be back in my sewing room within the next few weeks!

Seattle Fabrics did not provide me with the swatches free of charge; nor did they ask for a review. I would gladly do so if they offered me a length of fabric though!

Advertisements

5 thoughts on “Swatches Galore!

  1. I can virtual shop on Seattle Fabrics for hours! I’ve used some of those fabrics to sew for my husband and one of my kids for camping, hiking, cycling, etc.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s